NEVER USE A T-Post DRIVER TO BEAT A POLE INTO THE GROUND! Using the shovel and post hole digger, dig a hole Do not dig within 24” of utility markings Hole must be 3' deep and at least 7" wide at the bottom If in an 8’ pole market,...
Mounting Tools Stud finder Marking tool Drill 7/32” drill bit Level 1/2” nut setter 1/2” socket wrench 7/16” wrench Notes Key steps bolded All lags must be tightened snug plus a 1/4 turn Rail Supplies Mount Hardware Process Determine proper location for rail mount on railingRecommended location: where vertical rails intersect...
https://www.youtube.com/watch?v=PJ1whQfB89I ...
Mounting Tools Stud finder Marking tool Drill 7/32” drill bit Level 1/2” nut setter 1/2” socket wrench 7/16” wrench Notes Key steps bolded All lags must be tightened snug plus a quarter turn Direct to Wall Supplies Two 3" lag screws Four 2" lag screws Silicone Process Locate...